Take out the handheld cleaning gun in the chassis, make sure the button switch on the handle is released, and remove the lens dust cover at the front end of the laser cleaning gun.
Take out the external power cord and power on, and turn on the key switch on the laser cleaning host control panel.
Turn on the green button switch on the top, and the green indicator light will light up after turning it on, and the system will be initialized after powering on.
Complete the laser cleaning parameter setting through the laser cleaning host interface.
Press the laser enable button, and the gun head will light up for cleaning.
After use, turn off the laser cleaning screen enable key, the green physical key, and the side power switch in turn, insert the cleaning gun head back into the host chassis, and unplug the power plug.